horizontal fiber optic splice closure ETC-H011

Fiber optic splice closure with 4 ports holds up to 96 fibers ETC-D001

Manufacturing horizontal fiber optic splice closure equipment ETC-H001

Horizontal Joint Box 96 fibers optical splice closure ETC-H002

High quality Fiber horizontal Optical splice Joint Closure ETC-H003

96 fibers horizontal type fiber optic joint enclosure ETC-H004

6 ports horizontal type optical fiber cable joint closure ETC-H005

8 ports fiber horizontal Optic Splice Closure Joint Box ETC-H007

6 ports fiber Optic Splice Closure Joint Box ETC-H008 395×195×130MM

6 ports FTTH outdoor fiber optic enclosures ETC-H009 470×180×125MM

High quality fiber optic enclosures outdoor ETC-H010 430×180×125MM

4 ports horizontal type Optical fiber joint closure ETC-H011 340×150×70MM

Optical fiber splice closure with 4 ports ETC-D002 φ190×430MM

96 fibers optic splice closure with 4 ports ETC-D003 φ190×440MM

Fiber vertical optic splice closure with 5 ports ETC-D004 φ205×540MM

Outside dimension (Height x Diameter)	430mm×190mm
Weight (excluding outside box)	2500g—3100g
Number of inlet/outlet ports	4 pieces
Diameter of fiber cable	Φ8mm～Φ16 mm
Capacity of FOSC	Bunchy: 12-96 (cores), Ribbon: up to 288 (cores)

No.	Name of components	Quantity	Usage	Remarks
1	FOSC cover	1 piece	Protecting fiber cable splices in whole	Height x Diameter 355mm x 150mm
2	Fiber optic splice tray (FOST)	Max. 6 trays (bunchy) Max. 4 trays (ribbon)	Fixing heat shrinkable protective sleeve and holding fibers	Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces)
3	Fiber holding tray	1 pcs	Holding fibers with protective coat
4	Base	1set	Fixing internal and external structure
5	Plastic hoop	1 set	Fixing between FOSC cover and base
6	Seal fitting	1 pc	Sealing between FOSC cover and base
7	Seal rings for inlet/outlet ports	4pcs	For the inner seal of inlet/outlet ports; the diameter is 12.5mm,can shrink to 7mm
8	Pressure testing valve	1 set	After inject air, it is used for pressure testing and sealing testing	Configuration as per requirement
9	Earthing deriving device	1 set	Deriving metal parts of fiber cables in FOSC for earthing connection	Configuration as per requirement

No.	Name of accessories	Quantity	Usage	Remarks
1	Heat shrinkable protective sleeve		Protecting fiber splices	Configuration as per capacity
2	Nylon tie		Fixing fiber with protective coat	Configuration as per capacity
3	Earthing wire	1 piece	Putting through between earthing devices	To put through as per actual requirement
4	Abrasive cloth	1 piece	Scratching fiber cables
5	Labeling paper	1 piece	Labeling fibers
6	Special wrench	2 pieces	Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube
7	Measuring paper	1 piece	To measure perimeter, of which its diameter is enlarged with seal tape	To measure perimeter with the corresponding measuring paper
8	Seal tape	1 ring	Enlarging diameter of fiber cable which fits in with gasket ring.	Configuration as per specification
9	Insulation tape	1 ring	Enlarging diameter of fiber cable for easy fixing
10	Metal hoop	1 set	For wall mounting and pole hugging
11	Buffer tube	decided by customers	Hitched to fibers and fixed with FOST, managing buffer.	Configuration as per requirement
12	Desiccant	1 bag	Put into FOSC before sealing for desiccating air

cpt-type fiber optic splice closure ETC-D002

Fiber Optic Cable